Entering Pim View; Display And Debug Pim-Dm - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches

6.1.4 Entering PIM View

To configure PIM-related global parameters, you need to enter PIM view.
Please perform the following configurations in system view.
Table 6-3 Entering PIM view
Enter PIM view
Clear configurations in PIM view and return to system view

6.2 Display and Debug PIM-DM

After the above configuration, execute display command in any view to display the
running of PIM-DM configuration, and to verify the effect of the configuration.
Execute debugging command in user view for the debugging of PIM-DM.
Table 6-4 Display and debug PIM-DM
Display the PIM multicast
routing table
Display the PIM interface
information
Display the information about
PIM neighboring routers
Enable the PIM debugging
Disable the PIM debugging
Enable
debugging
Disable
debugging
Operation
Operation
the PIM-DM
the PIM-DM
Huawei Technologies Proprietary
Command
display pim routing-table [ { { *g [ group-address
[ mask { mask-length | mask } ] ] | **rp [ rp-address
[ mask { mask-length | mask } ] ] } | { group-address
[ mask { mask-length | mask } ] | source-address
[ mask { mask-length | mask } ] } * } |
incoming-interface { interface-type interface-num
| interface-name | null } | { dense-mode |
sparse-mode } ] *
display pim interface
interface-number ]
display pim neighbor [ interface interface-type
interface-number ]
debugging pim common { all | event | packet |
timer }
undo debugging pim common { all | event |
packet | timer }
debugging pim dm { alert | all | mbr | mrt | timer |
warning | { recv | send } { all | assert | graft |
graft-ack | join | prune } }
undo debugging pim dm { alert | all | mbr | mrt |
timer | warning | { recv | send } { all | assert | graft
| graft-ack | join | prune } }
6-4
Chapter 6 PIM-DM Configuration
Command
pim
undo pim
[ interface-type