Displaying And Debugging Bgp - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches

5.3 Displaying and Debugging BGP

After the above configuration, execute display command in any view to display the
running of the BGP configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of the configuration. Execute
debugging command in user view to debug the configuration. Execute reset
command in user view to reset the statistic information of BGP.
Table 5-41 Displaying and debugging BGP
Display the routing information of the
BGP
Display filtered AS path information in
the BGP
Display CIDR routes
Display the routing information of the
specified BGP community
Display the routing information allowed
by the specified BGP community list
Display BGP dampened paths
Display the routing information the
specified BGP peer advertised or
received
Display the routes matching with the
specified access-list
Display
information
View routes with different source ASs
Display neighbors information
Display the routing information that has
been configured
Display AS path information
Display peer group information
Operation
route flapping statistics
Huawei Technologies Proprietary
display bgp routing-table [ ip-address
[ mask ] ]
display ip as-path-acl acl-number
display bgp routing-table cidr
display bgp routing-table community
[ aa:nn |
no-advertise
[ whole-match ]
display
community-list community-list-number
[ whole-match ]
display bgp routing-table dampened
display bgp
peer-address { advertised | received }
[ network-address [ mask ] | statistic ]
display bgp routing-table as-path-acl
acl-number
display bgp routing-table flap-info
[ {
as-regular-expression } | { as-path-acl
acl-number } | { network-address [ mask
[ longer-match ] ] } ]
display
different-origin-as
display bgp
verbose
display bgp peer [ verbose ]
display bgp network
display
as-regular-expression
display bgp group [ group-name ]
5-24
Chapter 5 BGP Configuration
Command
no-export-subconfed
| no-export
bgp routing-table
routing-table peer
regular-expression
bgp routing-table
peer peer-address
bgp paths
|
]*