Resetting The Ospf Process; Displaying And Debugging Ospf - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches

4.2.29 Resetting the OSPF Process

If the undo ospf command is executed on a router and then the ospf command is used
to restart the OSPF process, the previous OSPF configuration will lose. With the reset
ospf command, you can restart the OSPF process without losing the previous OSPF
configuration.
Perform the following configuration in user view.
Table 4-30 Resetting the OSPF process
Reset the OSPF process
Resetting the OSPF process can immediately clear the invalid LSAs, make the
modified Router ID effective or re-elect the DR and BDR.

4.3 Displaying and Debugging OSPF

After the above configuration, execute display command in any view to display the
running of the OSPF configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug the OSPF module.
Table 4-31 Displaying and debugging OSPF
Display the brief information of
the OSPF routing process
Display OSPF statistics
Display LSDB information of
OSPF
Display OSPF peer information
Display
information
Display OSPF routing table
Display OSPF virtual links
Display OSPF request list
Display OSPF retransmission list
Display the information of OSPF
ABR and ASBR
Operation
Operation
OSPF next hop
Huawei Technologies Proprietary
reset ospf { all | statistics }
Command
display ospf brief
display ospf cumulative
display ospf [ area-id ] lsdb [ brief | [ asbr |
ase | network | nssa | router | summary ]
[ ip-address ] [ originate-router ip-address |
self-originate ] ]
display ospf peer [ brief ]
display ospf nexthop
display ospf routing
display ospf vlink
display ospf request-queue
display ospf retrans-queue
display ospf abr-asbr
4-24
Chapter 4 OSPF Configuration
Command