Huawei Quidway S3500 Series Operation Manual page 588

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
4) Sending the configuration information to log buffer.
Table 4-16 Sending the configuration information to log buffer
Device
Switch
5) Sending the configuration information to trap buffer.
Table 4-17 Sending the configuration information to trap buffer
Device
Switch
6) Sending the configuration information to SNMP
Configuration
Enable info-center
Set the information
output direction
logbuffer
Set information source
Configuration
Enable info-center
Set the information
output direction to
trapbuffer
Set information source
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
Default value
By default, Other
info-center is valid only if the info-center is
enabled. enabled.
You can configure the size of
to - the log buffer at the same
time.
You
modules and information to
be
time-stamp
- information, and so on. You
must turn on the switch of the
corresponding
before
debugging information.
Default value
By default, Other
info-center is valid only if the info-center is
enabled. enabled.
You can configure the size of
- the trap buffer at the same
time.
You
modules and information to
be
time-stamp
- information, and so on. You
must turn on the switch of the
corresponding
before
debugging information.
4-11
Configuration description
configurations
can define
sent out and
format
module
defining
Configuration description
configurations
can define
sent out and
format
module
defining
are
which
the
of
output
are
which
the
of
output