Displaying And Debugging The Mac Address Table; Mac Address Table Management Configuration Example - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches

2.3 Displaying and Debugging the MAC Address Table

After the above configuration, execute display command in any view to display the
running of the MAC address table configuration, and to verify the effect of the
configuration.
Execute debugging command in user view to debug MAC address table configuration.
Table 2-4 Displaying and debugging the MAC address table
Display the information in the address
table
Display the aging time of dynamic
address table entries
Enable the address table management
debugging
Disable the address table management
debugging

2.4 MAC Address Table Management Configuration Example

I. Networking requirements
The user logs in the switch via the Console port to configure the address table
management. It is required to set the address aging time to 500s and add a static
address 00e0-fc35-dc71 to Ethernet 0/2 in vlan1.
Operation
Huawei Technologies Proprietary
2-4
Chapter 2 MAC Address Table Management
Command
display mac-address
[ vlan vlan-id ] | [ static | dynamic ]
[ interface { interface-name
interface-type interface-num } ] [ vlan
vlan-id ] [ count ] ]
display mac-address aging-time
debugging mac-address
undo debugging mac-address
[ mac-addr
|