Huawei Quidway S3500 Series Operation Manual page 647

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Note:
This operation is only available for the SSH users using RSA authentication. At the
switch, you configure the RSA public key of the client, while at the client, you specify
the RSA private key which corresponds to the RSA public key.
This operation will fail if you configure password authentication for the SSH user.
Please perform the following configurations in system view.
Table 8-7 Configuring public key
Enter public key view
Delete a designated public key
When entering the public key edit view with the rsa peer-public-key command, you
can begin editing the public key with the public-key-code begin command. You can
key in blank space between characters, since the system can remove the blank space
automatically. But the public key should be composed of hexadecimal characters.
Terminate public key editing and save the result with the public-key-code end
command. Validity check comes before saving: the public key editing fails if the key
contains invalid characters.
Please perform the following configurations in the public key view.
Table 8-8 Starting/terminating public key editing
Enter public key edit view
Terminate public key edit view
Quit public key view
VIII. Associating public key with SSH user
Please perform the following configurations in system view.
Table 8-9 Associating public key with SSH user
Associate existing public with
an SSH user
Remove the association
Operation
Operation
Operation
Huawei Technologies Proprietary
Chapter 8 SSH Terminal Services
Command
rsa peer-public-key key-name
undo rsa peer-public-key key-name
Command
public-key-code begin
public-key-code end
peer-public-key end
Command
ssh user username assign rsa-key keyname
undo ssh user username assign rsa-key
8-6