Configuring A Sub Vlan; Configuring The Mapping Between Super A Vlan And A Sub Vlan - Huawei Quidway S3500 Series Operation Manual

Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches
Table 4-1 Configure a super VLAN
Configure a super VLAN
Remove super VLAN configuration
Note that:
You cannot configure Ethernet ports for the super VLAN.
When a VLAN is configured as a super VLAN, ARP proxy is automatically enabled
on it.
As long as super VLAN configuration is not removed, ARP proxy cannot be
disabled on the corresponding VLAN interface.

4.2.2 Configuring a Sub VLAN

You can configure a sub VLAN just as configuring a general VLAN. See Chapter 1
VLAN Configuration for details.
Perform the following configuration in the specified views.
Table 4-2 Configure a sub VLAN
Create a sub VLAN and enter the
corresponding view (system view)
Delete a sub VALN (system view)
Add an Ethernet port for the sub VLAN
(VLAN view)
Delete an Ethernet port from the sub
VLAN (VLAN view)
You can add multiple Ethernet ports (except the uplink port) for a sub VLAN.

4.2.3 Configuring the Mapping between Super a VLAN and a Sub VLAN

Perform the following configuration in VLAN view of the super VLAN.
Operation
Operation
Huawei Technologies Proprietary
4-2
Chapter 4 Super VLAN
Command
supervlan
undo supervlan
Command
vlan vlan-id
undo vlan { vlan-id [ to vlan-id ] | all }
port interface-list
undo port interface-list