Huawei Quidway S3500 Series Operation Manual page 132

Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches
h-nodes, where "h" stands for hybrid. Such nodes are b-nodes with the
peer-to-peer communication mechanism.
I. Configure NetBIOS node type of clients in a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Table 5-22 Configure NetBIOS node type of clients in the global DHCP address pool
Configure NetBIOS node type of clients in the
global DHCP address pool
Delete the NetBIOS node type configuration of
clients in the global DHCP address pool
II. Configure NetBIOS node type of clients in the DHCP address pool on the
current VLAN interface
Perform the following configuration in VLAN interface view.
Table 5-23 Configure NetBIOS node type of clients in the DHCP address pool on the
current VLAN interface
Configure NetBIOS node type of clients in the
DHCP address pool on the current VLAN
interface
Delete the configuration of the NetBIOS node
type of clients in the DHCP address pool on
the current VLAN interface
III. Configure NetBIOS node type of clients in multiple VLAN interface DHCP
address pools
Perform the following configuration in system view.
Table 5-24 Configure NetBIOS node type of clients in DHCP address pools on multiple
VLAN interfaces
Configure NetBIOS node type of clients
in DHCP address pools on multiple
VLAN interfaces
Delete the configuration of NetBIOS
node type of clients in DHCP address
pools on multiple VLAN interfaces
Operation
Operation
Operation
Huawei Technologies Proprietary
5-16
Chapter 5 DHCP Configuration
Command
netbios-type { b-node | h-node |
m-node | p-node }
undo netbios-type
Command
dhcp server
{ b-node | h-node | m-node |
p-node }
undo dhcp server netbios-type
Command
dhcp server netbios-type { b-node |
h-node | m-node | p-node } { interface
vlan-interface vlan_id [ to vlan-interface
vlan_id ] | all }
undo dhcp server
{ interface vlan-interface vlan_id [ to
vlan-interface vlan_id ] | all }
netbios-type
netbios-type