Huawei Quidway S3500 Series Operation Manual page 605

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
II. Networking diagram
Switch Switch Switch
Figure 4-2 Schematic diagram of configuration
III. Configuration steps
1) Configuration on the switch
Enabling info-center
[Quidway] info-center enable
# Set the host with the IP address of 202.38.1.10 as the loghost; set the severity level
threshold value as informational, set the output language to English; set that the
modules which are allowed to output information are ARP and IP.
[Quidway] info-center loghost 202.38.1.10 facility local4 language english
[Quidway] info-center source arp channel loghost log level informational
[Quidway] info-center source ip channel loghost log level informational
2) Configuration on the loghost
This configuration is performed on the loghost. The following example is performed on
SunOS 4.0 and the operation on Unix operation system produced by other
manufactures is generally the same to the operation on SunOS 4.0.
Step 1: Perform the following command as the super user (root).
# mkdir /var/log/Quidway
# touch /var/log/Quidway/information
Step 2: Edit file /etc/syslog.conf as the super user (root), add the following
selector/actor pairs.
# Quidway configuration messages
local4.info
Network Network
/var/log/Quidway/information
Huawei Technologies Proprietary
4-28
Chapter 4 System Maintenance and Debugging
PC PC