Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches
2.2.2 Enable/Disable GMRP on the Port
Perform the following configuration in Ethernet port view.
Table 2-2 Enable/Disable GMRP on the port
Enable GMRP on the port
Disable GMRP on the port
GMRP should be enabled globally before enabled on a port.
By default, GMRP is disabled on the port.
2.3 Display and debug GMRP
After the above configuration, execute display command in any view to display the
running of the GMRP configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug GMRP configuration.
Table 2-3 Display and debug GMRP
Display GMRP statistics.
Display GMRP global status.
Enable GMRP debugging
Disable GMRP debugging
2.4 GMRP Configuration Example
I. Networking requirements
Implement dynamic registration and update of multicast information between switches.
II. Networking diagram
Switch_A
Figure 2-1 GMRP networking
Operation
Operation
Huawei Technologies Proprietary
gmrp
undo gmrp
Command
display
gmrp
interface_list ]
display gmrp status
debugging gmrp event
undo debugging gmrp event
Switch_B
2-2
Chapter 2 GMRP Configuration
Command
statistics
[
interface