Add The Ethernet Port To Specified Vlans; Set The Default Vlan Id For The Ethernet Port - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Port
Quidway S3500 Series Ethernet Switches
You can configure three types of ports concurrently on the same switch, but you cannot
switch between trunk port and hybrid port. You must turn it first into access port and
then set it as other type. For example, you cannot configure a trunk port directly as
hybrid port, but first set it as access port and then as hybrid port.
By default, the port is access port.

1.2.10 Add the Ethernet port to Specified VLANs

The following commands are used for adding an Ethernet port to a specified VLAN. The
access port can only be added to one VLAN, while the hybrid and trunk ports can be
added to multiple VLANs.
Perform the following configuration in Ethernet port view.
Table 1-10 Add the Ethernet port to specified VLANs
Add the current access port to a
specified VLAN
Add the current hybrid port to specified
VLANs
Add the current trunk port to specified
VLANs
Remove the current access port from to
a specified VLAN.
Remove the current hybrid port from to
specified VLANs.
Remove the current trunk port from
specified VLANs.
Note that the access port shall be added to an existing VLAN other than VLAN 1. The
VLAN to which Hybrid port is added must have been existed. The one to which Trunk
port is added cannot be VLAN 1.
After adding the Ethernet port to specified VLANs, the local port can forward packets of
these VLANs. The hybrid and trunk ports can be added to multiple VLANs, thereby
implementing the VLAN intercommunication between peers. For the hybrid port, you
can configure to tag some VLAN packets, based on which the packets can be
processed differently.

1.2.11 Set the Default VLAN ID for the Ethernet Port

Since the access port can only be included in one VLAN only, its default VLAN is the
one to which it belongs. The hybrid port and the trunk port can be included in several
VLANs, it is necessary to configure the default VLAN ID. If the default VLAN ID has
Operation
Huawei Technologies Proprietary
1-7
Chapter 1 Ethernet Port Configuration
Command
port access vlan vlan_id
port hybrid vlan vlan_id_list { tagged |
untagged }
port trunk permit vlan { vlan_id_list |
all }
undo port access vlan
undo port hybrid vlan vlan_id_list
undo port trunk
{ vlan_id_list | all }
permit vlan