Save The Current-Configuration; Erase Configuration Files From Flash Memory - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Table 1-5 Display the configurations of the Ethernet switch
Display the saved-configuration
information of the Ethernet switch
Display the current-configuration
information of the Ethernet switch
Note:
The configuration files are displayed in their corresponding saving formats.

1.2.3 Save the Current-configuration

Use the save command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered on for
the next time.
Perform the following configuration in user view.
Table 1-6 Save the current-configuration
Save the current-configuration

1.2.4 Erase Configuration Files from Flash Memory

The reset saved-configuration command can be used to erase configuration files
from Flash Memory. The system will use the default configuration parameters for
initialization when the Ethernet switch is powered on for the next time.
Perform the following configuration in user view.
Table 1-7 Erase configuration files from Flash Memory
Erase configuration files from Flash Memory
You may erase the configuration files from the Flash in the following cases:
After being upgraded, the software does not match with the configuration files.
Operation
Operation
Operation
Huawei Technologies Proprietary
Chapter 1 File System Management
Command
display saved-configuration
display current-configuration [ controller |
interface interface-type [ interface-number ] |
configuration [ system | user-interface ] ] [ |
{ begin | exclude
regular-expression ]
save
reset saved-configuration
1-4
| include
Command
Command
}