Set The Threshold Of Switchover From The Rpt To The Spt; Display And Debug Pim-Sm; Pim-Sm Configuration Example - Huawei Quidway S3500 Series Operation Manual

Hide thumbs Also See for Quidway S3500 Series:
Table of Contents

Advertisement

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches

7.2.10 Set the Threshold of Switchover from the RPT to the SPT

The PIM-SM router uses the shared tree to forward multicast data packets initially. If the
rate of the multicast data exceeds the threshold, the last hop router the packet passes
will initiate a switch from the shared tree to the shortest path tree.
Perform the following configuration in PIM view.
Table 7-9 Set the threshold of switchover from the RPT to the SPT
Set the threshold of switchover
from the RPT to the SPT
Restore the default setting
By default, the threshold is 0. That is, the last hop router initiates the switch to the
shortest path tree upon the arrival of the first multicast data packet.

7.3 Display and Debug PIM-SM

After the above configuration, execute display command in any view to display the
running of PIM-SM configuration, and to verify the effect of the configuration.
Execute debugging command in user view for the debugging of PIM-SM.
Table 7-10 Display and debug PIM-SM
Operation
Display
information
Display
information
Enable
debugging
Disable
debugging

7.4 PIM-SM Configuration Example

I. Networking requirements
We assume that the Ethernet switches are reachable from each other in actual
networks.
Operation
the
BSR
display pim bsr-info
the
RP
display pim rp-info [ group-address ]
debugging pim sm { all | mbr | verbose | mrt | timer |
the
PIM-SM
warning | { recv | send } { assert | bootstrap | crpadv |
reg | regstop | jp } }
undo debugging pim sm { all | mbr | verbose | mrt |
the PIM-SM
timer | warning | { recv | send } { assert | bootstrap |
crpadv | reg | regstop | jp } }
Huawei Technologies Proprietary
Chapter 7 PIM-SM Configuration
Command
spt-switch-threshold { traffic-rate | infinity }
[ group-policy acl-number ]
undo spt-switch-threshold { traffic-rate |
infinity } [ group-policy acl-number ]
Command
7-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents