Displaying And Debugging User Interface - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches
[Quidway-ui-vty0] auto-execute command telnet 10.110.100.1
When a user logs on via VTY 0, the system will run telnet 10.110.100.1 automatically.

4.3 Displaying and Debugging User Interface

After the above configuration, execute display command in any view to display the
running of the user interface configuration, and to verify the effect of the configuration.
Execute free command in user view to clear a user in a specified user interface.
Table 4-20 Displaying and debugging user interface
Clear a user in a specified user interface
Display the user application information
of the user interface
Display the physical attributes and some
configurations of the user interface
Operation
Huawei Technologies Proprietary
4-11
Chapter 4 User Interface Configuration
Command
free user-interface [ type ] number
display users [ all ]
display user-interface [ type number ]
[ number ]