8.4
Disassembly and Replacement
[A] Laser optical unit
Note:
Perform step (7) only when the Damp Heater Kit (optional) is installed.
(1)
Take off the toner bag.
P.12-11 "[A] Toner bag"
(2)
Take off the used toner motor unit.
P.12-23 "[C] Used toner motor cover"
(3)
Disconnect 2 connectors of the laser optical
unit.
(4)
Remove 2 screws.
e-STUDIO2500c/3500c/3510c LASER OPTICAL UNIT
8 - 12
Fig. 8-12
Fig. 8-13
May 2006 © TOSHIBA TEC