Toshiba e-STUDIO2500c Service Manual page 360

[B] Fuser belt center thermopile(THMP1) / Fuser belt rear thermopile(THMP2)
Note:
Be sure not to touch the lens of the thermopile. If it is dirty, use a cloth with a small amount of
alcohol to clean it.
(1) Take off the fuser unit.
P.15-17 "[A-1] Fuser unit"
(2) Loosen 2 screws and take off the Fuser belt
thermopile cover.
(3) Loosen 1 screw of each thermopile. Then
disconnect the connector to take off the ther-
mopile bracket.
(4) Remove 1 screw of each thermopile. Then
take off the thermopiles from their brackets
and covers.
e-STUDIO2500c/3500c/3510c FUSER UNIT / PAPER EXIT SECTION
15 - 36
Fuser belt
thermopile cover
Fig. 15-60
Thermopile bracket
Fig. 15-61
Cover
Thermopile
Bracket
Fig. 15-62
May 2006 © TOSHIBA TEC