Toshiba e-STUDIO2500c Service Manual page 222

(2) Take off the paper feed guide assembly.
P.10-32 "[G] Paper feed guide assembly"
(3) Take off each cover of the both sides of the
registration guide.
(4) Remove each spring from the both front and
rear hooks. Then remove the cam and wire.
(5) Disconnect 1 connector and remove 3
screws. Then take off the registration guide.
Note:
The outer 2 of these 3 screws are stepped
screws.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 34
Cover
Fig. 10-62
Cam
Spring
Fig. 10-63
Registration guide
Fig. 10-64
May 2006 © TOSHIBA TEC