Toshiba e-STUDIO2500c Service Manual page 311

(5) Remove 1 screw and then disconnect 1 relay
connector to take off the 1st transfer roller
cam motor assembly.
(6) Release the 1 latch and take off the 3 gears.
(7) Remove 2 screws, and then take off the 1st
transfer roller cam motor.
May 2006 © TOSHIBA TEC
1st transfer roller cam
motor gear assembly
Fig. 13-37
Gear
Gear
Fig. 13-38
1st transfer roller cam motor
Fig. 13-39
e-STUDIO2500c/3500c/3510c TRANSFER UNIT
13 - 23
Relay connector
Gear
13