Toshiba e-STUDIO2500c Service Manual page 269

(6) Discharge the developer material.
Notes:
• Make sure not to have developer material
adhering to the drive gears or bushings.
• If the developer material on the developer
sleeve is hard to come off, use a brush
(jig) to clean it off.
4407915710 BRUSH-33
(7) Shake the developer bottle and attach the
nozzle to it.
(8) Fill up the mixer section under the developer
sleeve with the developer.
(9) Rotate the knob in the direction described in
the figure until the developer adheres on the
surface of the developer sleeve evenly.
May 2006 © TOSHIBA TEC
Fig. 12-13
Developer sleeve
Mixer
Fig. 12-14
Knob
Fig. 12-15
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
12 - 13
Developer material bottle
Developer sleeve
12