Toshiba e-STUDIO2500c Service Manual page 304

[B-2] Transfer belt
Note:
It is recommended to wear gloves to avoid a direct touch on the belt surface.
(1) Take off the transfer belt unit.
P.13-14 "[B-1] Transfer belt unit (TBU)"
(2) Remove 8 screws, and then take off the 2
stays.
(3) Remove 2 screws, and then take off the TBU
cleanner pressure hook assembly and 2
springs.
(4) Push the stopper while pushing the arm of
the tension roller, and then release the ten-
sion of the transfer belt.
e-STUDIO2500c/3500c/3510c TRANSFER UNIT
Stay
Spring
TBU cleanner
pressure hook assembly
13 - 16
Stay
Fig. 13-16
Spring
Fig. 13-17
Arm
Stoper
Fig. 13-18
May 2006 © TOSHIBA TEC