Toshiba e-STUDIO2500c Service Manual page 313

(4) Disconnect 1 connector, and then remove 2
clamps.
(5) Remove 1 screw, and then take off the 2nd
transfer unit hinge stay.
(6) Lift up the 2nd transfer unit slightly, and then
take it off by sliding it to the front side.
May 2006 © TOSHIBA TEC
Connector
Clamp
Fig. 13-43
2nd transfer unit hinge stay
Fig. 13-44
Fig. 13-45
e-STUDIO2500c/3500c/3510c TRANSFER UNIT
13 - 25
2nd transfer unit
13