Toshiba e-STUDIO2500c Service Manual page 382

(5) Remove 2 screws and take off the ADU
motor.
(6) Take off the 1 E-ring. Then take off the 3
gears and timing belt from the ADU drive
unit.
[J] Upper transport roller
(1) Take off the ADU drive unit.
P.16-17 "[I] ADU drive unit / ADU motor
(M22)"
(2) Remove 1 E-ring on the rear side. Then take
off 1 pulley.
e-STUDIO2500c/3500c/3510c AUTOMATIC DUPLEXING UNIT (ADU)
Gear
Gear
E-ring
Pulley
E-ring
16 - 18
ADU motor
Fig. 16-22
Timing belt
Gear
Fig. 16-23
Fig. 16-24
May 2006 © TOSHIBA TEC