Toshiba e-STUDIO2500c Service Manual page 94

Process
11.Fusing
1) Method
2) Cleaning
3) Heater temperature
4) Heater
e-STUDIO2500c/3500c/3510c COPY PROCESS
e-STUDIO281c/351c/451c
1) Belt fusing system
- Fuser roller: Fluorinated iron
roller (ø40)
(IH coil: 700 to 1300 W)
- Pressure roller: Silicon sponge
roller (Surface-PFA tube)
Discharge brush
- Fuser belt: PFA tube belt (ø55)
- Separation roller: Sponge roller
(ø20)
2) Oil roller method
- Oil roller (ø18)
- Cleaning roller (ø16)
3) ON/OFF control and power control
by thermistor
4) IH coil
3 - 14
e-STUDIO2500c/3500c/3510c
1) Belt fusing system
- Fuser roller: Aluminium roller
(ø30)
(Heater lamp: 600 W x 2)
- Pressure roller: Silicon rubber
roller (Surface-PFA tube)(ø40)
(Heater lamp: 300 W x 1)
- Fuser belt: PFA tube belt (ø60)
- Fuser roller: Sponge roller
(ø38)
2) None
3) ←
4) Heater lamp
May 2006 © TOSHIBA TEC