Toshiba e-STUDIO2500c Service Manual page 36

Symbol
S16 IMG-POS-SNR-F
Image position aligning sensor (Front)
S17 IMG-POS-SNR-R
Image position aligning sensor (Rear)
S18 TNR-LVL-SNR
Image quality sensor
S19 DRM-SW-SNR
Drum switching detection sensor
S20 SHUT-SNR
Shutter status detection sensor
S21 CH-CLN-SNR
Needle electrode cleaner detection
sensor
S22 ATTNR-SNR-Y
Auto-toner sensor-Y
S23 ATTNR-SNR-M
Auto-toner sensor-M
S24 ATTNR-SNR-C
Auto-toner sensor-C
S25 ATTNR-SNR-K
Auto-toner sensor-K
S26 EXIT-SNR
Exit sensor
S27 CLNG-SNR
Paper clinging detection sensor
S28 RGST-SNR
Registration sensor
S29 TR2-SNR
2nd transfer roller position detection
sensor
S30 CST1-FEED-SNR
1st drawer feed sensor
S31 CST1-TRY-SNR
1st drawer tray-up sensor
S32 CST1-EMP-SNR
1st drawer empty sensor
S33 CST1-NEMP-SNR
1st drawer paper stock sensor
S34 CST2-FEED-SNR
2nd drawer feed sensor
S35 CST2-TRY-SNR
2nd drawer tray-up sensor
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
Name
Detecting the front side position of a
toner image (test pattern) developed on
the transfer belt
Detecting the rear side position of a
toner image (test pattern) developed on
the transfer belt
Detecting the density of a toner image
(test pattern) developed on the transfer
belt surface
Detecting contact/release status of the
drive to the Y/M/C drums
Detecting the status of the laser emis-
sion outlet (slit glass) protective shutter
Detecting the cleaning operation for the
needle electrode (Detecting that the
needle electrode cleaner has reached
the limit position) (only for K)
Detecting the toner density in the Y
developer unit
Detecting the toner density in the M
developer unit
Detecting the toner density in the C
developer unit
Detecting the toner density in the K
developer unit
Detecting paper exit
Detecting whether the paper is clinging
to the transfer belt or not
Detecting paper transport at the regis-
tration roller section
Detecting the contact/release status of
the 2nd transfer roller
Detecting paper transport and paper
jam at the paper feeding system of the
1st drawer
Detecting the lifting status of the tray in
the 1st drawer
Detecting the presence of paper in the
1st drawer
Detecting the paper remaining in the
1st drawer
Detecting paper transport and paper
jam at the paper feeding system of the
2nd drawer
Detecting the lifting status of the tray in
the 2nd drawer
Function
2 - 20
Remarks P-I
Fig. 2-6 27-4
Fig. 2-6 27-4
Fig. 2-6 27-5
Fig. 2-7 16-20
Fig. 2-7 36-101
Fig. 2-7 36-101
Fig. 2-7 38-31
Fig. 2-7 38-31
Fig. 2-7 38-31
Fig. 2-7 38-31
Fig. 2-9 45-101
Fig. 2-10 13-108
Fig. 2-10 25-102
Fig. 2-10 11-102
Fig. 2-11 25-102
Fig. 2-11 20-30
Fig. 2-11 20-30
Fig. 2-11 20-30
Fig. 2-11 26-101
Fig. 2-11 20-30
May 2006 © TOSHIBA TEC