Output Channel - Toshiba e-STUDIO2500c Service Manual

17.3 Output Channel

The following are 3 output channels for the main switch line.
1) +3.3 V
+3.3VA: CN402 Pins 9 and 10
Output to the SYS board
+3.3VA: CN405 Pin 1
Output to the IMG board
+3.3VB: CN402 Pin 13
Output to the SYS board
+3.3VB: CN403 Pins 1 and 2
Output to the LGC board
+3.3VB: CN404 Pin 3
Output to the SLG board
+3.3VB: CN405 Pins 2, 3 and 4
Output to the IMG board
2) +5.1 V
+5.1VA: CN402 Pins 19, 20, 21and 22
Output to the SYS board
+5.1VB: CN402 Pin 17
Output to the SYS board
+5.1VB: CN403 Pin 7
Output to the LGC board, PFP/LCF (via LGC board), Bridge unit (via LGC board)
+5.1VB: CN404 Pins 1 and 2
Output to the SLG board, RADF
+5.1VB: CN406 Pin 4
Output to the finisher
+5.1VB: CN412 Pin 1
Output to the FIL board
3) +12 V
+12VA: CN402 Pin 5
Output to the SYS board
+12VB: CN402 Pin 3
Output to the SYS board
+12VB: CN403 Pin 9
Output to the LGC board
+12VB: CN408 Pin 1
Output to the FAX unit
May 2006 © TOSHIBA TEC e-STUDIO2500c/3500c/3510c POWER SUPPLY UNIT
17 - 3
17