Toshiba e-STUDIO2500c Service Manual page 54

(5) Remove 2 screws and the 2 ground wires.
(6) Remove 4 screws and take off the hard disk.
[B] Board cover
(1) Take off the rear cover-2.
P.2-36 "[S] Rear cover-2"
(2) Remove 1 screw and loosen 9 screws.
(3) Slide the board cover, disconnect the con-
nector of the fan, and take off the board
cover.
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
Hard disk
2 - 38
Ground wire
Fig. 2-39
Fig. 2-40
Board cover
Fig. 2-41
May 2006 © TOSHIBA TEC