Toshiba e-STUDIO2500c Service Manual page 63

(8) Slide the RADF backward and lift it up to take
it off.
Notes:
When taking off the RADF and installing the
platen cover, or taking off the platen cover
and installing the RADF, the position of the
installing screw for the damper holding
bracket of the scanner should be as follows.
1. Remove 1 screw and take off the gel
cover.
2. Change the position of the installing
screw for the damper holding bracket.
Installing the RADF: A
Installing the platen cover: B
May 2006 © TOSHIBA TEC
Fig. 2-63
Gel cover
Fig. 2-64
Fig. 2-65
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
2 - 47
A
B
2