Toshiba e-STUDIO2500c Service Manual page 152

[E] Lens unit
(1) Remove the lens cover.
P.6-19 "[B] Lens cover"
(2) Disconnect 1 connector and remove 5
screws, then take off the lens unit.
Notes:
1. When installing the lens unit, fix it while
pushing it to the rear direction.
2. For adjustment, refer to "3.12.2 Lens
Unit" in the Service Handbook.
3. Do not touch 6 screws shown with the
arrows when replacing the lens unit.
4. Handle the unit with care. Do not touch
the adjusted area and lens. (Hold the unit
as the right figure.)
e-STUDIO2500c/3500c/3510c SCANNER
Lens unit
6 - 22
Fig. 6-27
Fig. 6-28
Fig. 6-29
May 2006 © TOSHIBA TEC