2.5
Disassembly and Replacement of Covers
[A] Front cover
(1)
Open the front cover.
(2)
Remove the toner bag.
P.12-11 "[A] Toner bag"
(3)
Remove 1 screw and take off the stopper
belt.
(4)
Raise 2 hinge pins on the right and left, and
then pull them out.
(5)
Take off the front cover.
[B] Inner tray
(1)
Open the front cover.
(2)
Remove 2 screws and take off the inner tray.
May 2006 © TOSHIBA TEC
Stopper belt
Fig. 2-16
Inner tray
Fig. 2-17
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
2 - 27
Hinge pin
Front cover
2