Toshiba e-STUDIO2500c Service Manual page 315

(3) Remove 1 screw and take off the paper cling-
ing detection sensor.
[C-5] TRU earth plate
(1) Take off the TRU cover.
P.13-26 "[C-3] TRU cover"
(2) Disconnect the connector of paper clinging
detection sensor, and release the harness
out of 2 hooks.
(3) Remove 2 screws and take off the resistor.
May 2006 © TOSHIBA TEC
Paper clinging detection sensor
Fig. 13-49
Paper clinging detection sensor
Hook
Fig. 13-50
Fig. 13-51
e-STUDIO2500c/3500c/3510c TRANSFER UNIT
13 - 27
Connector
Resistor
13