Toshiba e-STUDIO2500c Service Manual page 283
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO2500c:
- Operator's manual (414 pages) ,
- Scanning manual (156 pages) ,
- Colour manual (8 pages)
Table of Contents
Advertisement
(3)
Disconnect the 1 connector on the developer
unit motor.
(4)
Remove 2 screws and take off the developer
drive unit.
[J]
Toner motor assembly
Dedicated toner motors and toner cartridge detection sensors which correspond to the process units
(EPU (Y, M, C, K)) respectively are installed.
•
Process unit (EPU (Y)): Toner motor (M2), Toner cartridge detection sensor (S8)
•
Process unit (EPU (M)): Toner motor (M3), Toner cartridge detection sensor (S9)
•
Process unit (EPU (C)): Toner motor (M4), Toner cartridge detection sensor (S10)
•
Process unit (EPU (K)): Toner motor (M5), Toner cartridge detection sensor (S11)
Take off the corresponding toner motor assembly.
(1)
Take off the tray back cover and transfer belt
cleaning unit".
P.2-28 "[C] Tray back cover"
P.13-11 "[A-1] Transfer belt cleaning unit"
(2)
(2) Remove 2 screws and take off the toner
cover.
May 2006 © TOSHIBA TEC
Developer drive unit
Fig. 12-54
Fig. 12-55
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
12 - 27
Connector
Toner cover
12
Advertisement
Table of Contents
