Toshiba e-STUDIO2500c Service Manual page 205

(3) Remove 1 screw for the plate spring. And
remove 1 screw on the tray side and take off
the bracket.
Note:
Install the bracket so that its pointer is placed
at the same position as before.
(4) Disconnect 1 connector, remove 1 screw and
take off the SFB board.
May 2006 © TOSHIBA TEC
Plate spring
Fig. 10-17
Fig. 10-18
Fig. 10-19
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 17
Bracket
Pointer
SFB board
10