Toshiba e-STUDIO2500c Service Manual page 214

[B-4] Separation roller
(1) Take off the drawer feeding unit.
P.10-24 "[B-1] Drawer feeding unit"
(2) Remove 1 screw and take off the separation
roller holder.
(3) Detach the lever from the holder and take off
the separation roller with the shaft.
(4) Detach the cover, the arbor and the clutch
spring from the shaft, and then takeoff the
separation roller.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
Separation roller holder
Holder
Arbor
Cover
Clutch spring
10 - 26
Fig. 10-41
Lever
Separation roller
Fig. 10-42
Separation roller
Shaft
Arbor
Fig. 10-43
May 2006 © TOSHIBA TEC