Toshiba e-STUDIO2500c Service Manual page 279

(8) Take off the mixer from the hole of front side.
[C] Used toner motor cover
(1) Open the front cover and take out the toner
bag.
P.12-11 "[A] Toner bag"
(2) Remove 2 screws and take off the duct.
(3) Remove 1 screw and take off the stopper.
(4) Disconnect 2 relay connectors and remove 1
screw. Then take off the used toner motor
cover.
May 2006 © TOSHIBA TEC
Fig. 12-42
Fig. 12-43
Relay connector
Fig. 12-44
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
12 - 23
Mixer
Duct
Stopper
Used toner motor cover
12