Toshiba e-STUDIO2500c Service Manual page 104
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO2500c:
- Operator's manual (414 pages) ,
- Scanning manual (156 pages) ,
- Colour manual (8 pages)
Table of Contents
Advertisement
•
When the paper in the drawer gets short during copying,
The tray-up sensor turned OFF
The tray-up motor turned ON - Tray goes up
Tray-up sensor turned ON
Tray-up motor stopped
•
Empty sensor turned OFF during the copying in spite of the tray-up sensor is ON
(B) Paper misfeed in bypass
•
During bypass feeding
Bypass feed clutch (CLT8) is turned ON
Registration sensor (S28) is turned ON
* Registration sensor (S28) is not turned ON in a fixed period of time (E120)
Bypass misfeeding
Bypass misfeed symbol is displayed
The copying operation is disabled.
Solution: The bypass sensor (S40) is turned OFF by removing the paper from the bypass tray.
e-STUDIO2500c/3500c/3510c GENERAL OPERATION
It is judged that there is no paper.
Drawer area of the control panel blinks.
(When the drawer is selected)
The copying operation is stopped.
4 - 10
May 2006 © TOSHIBA TEC
Advertisement
Table of Contents
