Toshiba e-STUDIO2500c Service Manual page 390

The following are 2 output channels for the cover switch line.
1) +5.1 V
+5.1VD:
2) +24 V
+24VD:
+24VD:
+24VD1:
+24VD2:
+24VD3:
+24VD4:
+24VD4:
Output voltage by the type of connector
Main switch line
Connector
CN402 For the SYS board
CN403 For the LGC board, PFP/LCF (via LGC
board), bridge unit (via LGC board)
CN404 For the SLG board, RADF
CN405 For the IMG board
CN406 For the finisher
CN408 For the FAX unit
CN412 For the FIL board
Cover switch line
Connector
CN403 For the LGC board, PFP/LCF (via LGC
board), high-voltage transformer (via LGC
board), bridge unit (via LGC board)
CN404 For the SLG board, RADF
CN406 For the finisher
CN410 For the switching regulator cooling fan-1
CN411 For the switching regulator cooling fan-2
e-STUDIO2500c/3500c/3510c POWER SUPPLY UNIT
CN403 Pin 21
Output to the LGC board
CN410 Pin 1
Output to the switching regulator cooling fan-1
CN411 Pin 1
Output to the switching regulator cooling fan-2
CN403 Pins 19 and 20
Output to the LGC board, PFP/LCF (via LGC board)
CN403 Pins 17 and 18
Output to the LGC board
CN403 Pins 13 and 15
Output to the LGC board, high-voltage transformer (via LGC board), bridge unit
(via LGC board)
CN404 Pins 11, 12, 13 and 14
Output to the SLG board, RADF
CN406 Pin 2
Output to the Finisher
Destination
Destination
+3.3VA, +3.3VB, +5.1VA, +5.1VB, +12VA,
+12VB
+3.3VB, +5.1VB, +12VB
+3.3VB, +5.1VB
+3.3VA, +3.3VB
+5.1VB
+12VB
+5.1VB
+5.1VD, +24VD1, +24VD2, +24VD3
+24VD4
+24VD4
+24VD
+24VD
17 - 4
Voltage
Voltage
May 2006 © TOSHIBA TEC