Toshiba e-STUDIO2500c Service Manual page 362

(4) Remove 2 screws and take off the 2 leaf
springs.
(5) Remove 1 E-ring and take off the gear.
(6) Remove 2 E-rings and take off the 2 bushing
and upper exit roller.
(7) Remove the lower exit roller from the exit
flame. Slide the 4 lower exit rollers to sepa-
rate it from the 2 shafts.
e-STUDIO2500c/3500c/3510c FUSER UNIT / PAPER EXIT SECTION
Leaf spring
Exit flame
Bushing
Exit flame
Shaft
Lower exit roller
15 - 38
Exit flame
Fig. 15-66
Bushing
Upper exit roller
Fig. 15-67
Lower exit roller
Shaft
Lower exit roller
Fig. 15-68
May 2006 © TOSHIBA TEC
Gear