Toshiba e-STUDIO2500c Service Manual page 217

[C] Tray drive unit
[C-1] Tray-up motor (M21)
(1) Remove the upper and lower drawers.
(2) Take off the filter bracket.
P.2-42 "[I] FIL board"
(3) Disconnect 1 connector. Remove 4 screws
and take off the tray drive unit.
(4) Place the unit with its coupling up and
release 6 latches to take off the cover.
Note:
Be careful in taking off the cover because
there is a spring in the tray drive unit.
(5) Take off the tray-up motor.
May 2006 © TOSHIBA TEC
Tray drive unit
Fig. 10-49
Cover
Coupling
Fig. 10-50
Fig. 10-51
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 29
Coupling
Tray-up motor
10