Toshiba e-STUDIO2500c Service Manual page 207

[A-6] Bypass pickup solenoid (SOL1)
(1) Take off the bypass feed upper cover.
P.10-18 "[A-4] Bypass feed upper cover"
(2) Remove 4 screws and take off the upper
plate.
(3) Remove 1 spring. Disconnect 1 connector
and take off the bypass pickup solenoid with
the solenoid arm.
[A-7] Bypass paper sensor (S40)
(1) Take off the bypass feed upper cover.
P.10-18 "[A-4] Bypass feed upper cover"
(2) Remove 4 screws and take off the upper
plate.
May 2006 © TOSHIBA TEC
Upper plate
Fig. 10-22
Solenoid arm
Fig. 10-23
Upper plate
Fig. 10-24
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 19
Bypass pickup solenoid
10