Toshiba e-STUDIO2500c Service Manual page 224

(3) Remove the seal, and then take off the 1st
drawer feed sensor.
[M] Registration roller (Rubber)
(1) Open the 2nd transfer unit.
(2) Remove 1 screw on the front side, and then
remove the holder and spring.
(3) Remove 1 screw on the rear side, and then
remove the holder and spring.
(4) Take off the registration roller (rubber) with its
holder.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
1st drawer feed sensor
Registration roller ( Rubber )
10 - 36
Fig. 10-68
Holder
Fig. 10-69
Fig. 10-70
May 2006 © TOSHIBA TEC