(3)
Remove 2 screws and take off the toner sup-
ply section.
(4)
Remove 1 clamp, and then disconnect 1
relay connector.
(5)
Remove 1 screw.
(6)
Pull out the toner rod to the front of the
equipment. Remove 1 clip and take off the
toner motor assembly from the toner rod.
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
Toner supply section
Connector
Toner motor assembly
Toner rod
12 - 28
Fig. 12-56
Clamp
Fig. 12-57
Clip
Fig. 12-58
May 2006 © TOSHIBA TEC