Toshiba e-STUDIO2500c Service Manual page 221

[I] Side cover switch (SW4)
(1) Take off the paper feed guide assembly.
P.10-32 "[G] Paper feed guide assembly"
(2) Remove 2 screws, and then take off the
paper feed guide A by sliding it.
(3) Disconnect 1 connector, and then release 2
latches to take off the side cover switch.
[J] Registration guide
(1) Perform the output check (03-239) to set the
plunger at the receded position before taking
off the registration guide.
May 2006 © TOSHIBA TEC
Fig. 10-59
Fig. 10-60
Fig. 10-61
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 33
Paper feed guide-A
Side cover switch
Plunger
10