Toshiba e-STUDIO2500c Service Manual page 223

[K] Registration sensor (S28)
(1) Take off the registration guide.
P.10-33 "[J] Registration guide"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the registration sensor with its
bracket.
(3) Remove the seal, and then take off the regis-
tration sensor.
[L] 1st drawer feed sensor (S30)
(1) Take off the registration guide.
P.10-33 "[J] Registration guide"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the 1st drawer feed sensor with
its bracket.
May 2006 © TOSHIBA TEC
Registration sensor
Fig. 10-65
Fig. 10-66
Fig. 10-67
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 35
Registration sensor
1st drawer feed sensor
10