Toshiba e-STUDIO2500c Service Manual page 72

(4) Remove 1 screw and take off the fixing plate.
(5) Take off the finisher.
Note:
Be careful not to fell the finisher when mov-
ing only the finisher unit.
[F] MJ-6004 (Hole punch unit)
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
connector.
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
2 - 56
Fig. 2-90
Fig. 2-91
Fig. 2-92
May 2006 © TOSHIBA TEC