Toshiba e-STUDIO2500c Service Manual page 280

[D] Temperature / humidity sensor (S12)
(1) Take off the used toner motor.
P.12-23 "[C] Used toner motor cover"
(2) Release the 2 latches. Disconnect the 1 con-
nector and take off the temperature / humid-
ity sensor.
[E] Toner bag full detection sensor (S13)
(1) Take off the used toner motor.
P.12-23 "[C] Used toner motor cover"
(2) Remove the seal. Release the latch, and
then take off the toner bag full detection sen-
sor.
[F] Used toner motor lock detection sensor (S14)
(1) Take off the used toner motor.
P.12-23 "[C] Used toner motor cover"
(2) Remove 1 screw and take off the sensor
cover.
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
Latch
Temperature / humidity sensor
Toner bag full detection sensor
Connector
Sensor cover
12 - 24
Connector
Fig. 12-45
Seal
Fig. 12-46
Fig. 12-47
May 2006 © TOSHIBA TEC