Toshiba e-STUDIO2500c Service Manual page 285

[K] Toner motor (M2, M3, M4, M5)
(1) Take off the toner motor assembly.
P.12-27 "[J] Toner motor assembly"
(2) Remove 1 screw and take off the toner
motor.
[L] Toner cartridge detection sensor (S8, S9, S10, S11)
(1) Take off the toner motor assembly.
P.12-27 "[J] Toner motor assembly"
(2) Disconnect 1 connector, and then release
the latch to take off the Toner cartridge
detection sensor.
[M] Ozone filter-1
(1) Remove 1 screw, and then take off the ozone
filter-1.
May 2006 © TOSHIBA TEC
Fig. 12-59
Toner cartridge detection sensor
Connector
Fig. 12-60
Fig. 12-61
e-STUDIO2500c/3500c/3510c DEVELOPER UNIT
12 - 29
Toner motor
Ozone filter-1
12