Disassembly And Replacement; Removal And Installation Of Options; Mj-1038 (Inner Finisher) - Toshiba e-STUDIO477S Service Manual

2.

DISASSEMBLY AND REPLACEMENT

2.1

Removal and Installation of Options

Important:
Before installing or removing options, turn the main power switch off and disconnect the power
cable from the outlet.
2.1.1

MJ-1038 (Inner finisher)

(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Open the scanner.
(5) Remove 2 screws and take off the stacker
tray.
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-1
Fig. 2-2
2 - 1
e-STUDIO477S/527S/477SL
DISASSEMBLY AND REPLACEMENT
2