Toshiba e-STUDIO2500c Service Manual page 58

(3) Remove 7 screws.
(4) Release 2 locking supports and take off the
high-voltage transformer.
[I] FIL board
(1) Take off the right lower cover.
P.2-33 "[M] Right lower cover"
(2) Take off the rear cover-3.
P.2-36 "[T] Rear cover-3"
(3) Remove 5 screws and take off the filter
bracket.
(4) Remove the harness band.
(5) Disconnect 2 connectors and 2 terminals.
(6) Remove 2 screws, release the locking sup-
port and take off the FIL board.
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
High-voltage transformer
FIL board
2 - 42
Fig. 2-50
Filter bracket
Fig. 2-51
Fig. 2-52
May 2006 © TOSHIBA TEC