Toshiba e-STUDIO2500c Service Manual page 157

[K] SLG board (SLG)
(1) Take off the lens cover.
P.6-19 "[B] Lens cover"
(2) Disconnect 8 connectors, remove 6 screws
and take off the SLG board.
[L] Scanner unit cooling fan (M30)
(1) Take off the upper rear cover.
P.2-35 "[Q] Upper rear cover"
(2) Disconnect 1 connector. Release the har-
ness from the harness clamp. Remove 2
screws and take off the scanner unit cooling
fan.
May 2006 © TOSHIBA TEC
SLG board
Fig. 6-42
Scanner unit cooling fan
Fig. 6-43
e-STUDIO2500c/3500c/3510c SCANNER
6 - 27
6