Toshiba e-STUDIO2500c Service Manual page 281

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2500c:

Table of Contents

Remove 2 screws. Disconnect 1 connector

and take off the 2 bushings, actuator, gear

and sensor bracket.

Remove the seal.

Release the latch, and then take off the used

toner motor lock detection sensor.

[G] Used toner motor (M6)

Take off the toner bag full detection sensor

and used toner motor lock detection sensor.

P.12-24 "[E] Toner bag full detection sen-

P.12-24 "[F] Used toner motor lock detec-

tion sensor (S14)"

Remove 1 screw. Disconnect 1 relay connec-

tor, and take off the used toner motor

Used toner motor lock detection sensor

Relay connector

e-STUDIO2500c/3500c/3510c DEVELOPER UNIT

Sensor bracket

Used toner motor

E-studio3500c E-studio3510c